All CDJ-2000NXS modsLNNRT Mods · Release notes

CDJ-2000NXS
changelog

New releases, improvements and fixes for your player. All in one place.

Stay up to date

Get notified about new CDJ-2000NXS releases. Each notification opens this changelog.

Optional, for this player only. Your browser will ask for permission.

About notifications

Your browser’s push subscription and chosen player are saved to send release updates. No account or firmware upload is needed. Disable notifications here to remove this player’s subscription.

Latest update

All mods updated to v1.0.6

  • Gated Hotcues now works as on the CDJ-3000: with the deck paused, hold Hotcue A, B or C and the track plays from that Hotcue while you hold the pad; let go and it jumps back to the Hotcue and stops. Press PLAY during the hold to keep playing. While the track plays, the pads work as before.
  • Switch it on in UTILITY > GATED HOTCUES (it is OFF again after a restart).
  • New version 1.0.6 (it follows 1.0.5; nothing else changed). Not tested on a deck: Gated Hotcues ran in the emulator only.

Gated Hotcues updated to v0.2.0

  • Rebuilt from source; hold-to-play from pause, back to the Hotcue on release, PLAY during the hold keeps playing.

All mods updated to v1.0.5

  • Phase Meter Type 2 is updated: the MASTER PLAYER box and its counter now show only while another player is master (they showed on the master deck itself), the local lane follows SYNC, and the screen is redrawn with about 290 fewer drawing calls a frame, so it should lag less. The faint text of the stock meter under it is gone.
  • WAVE COLOR (BLUE, RGB or 3BAND) is now saved on the USB stick or SD card and comes back at the next start. Before, it had to be set again after every start.
  • UTILITY switches (GUI ERRORS, BEAT NUMBERS, LOOP MODE): a choice that did not reach the player is sent again, so a switch no longer needs two turns. The choices are saved on the USB stick or SD card in the deck, no longer depending on the medium of the loaded track (a track from another player or from the other medium could keep a choice from being saved or bring back an old one).
  • Beat Numbers no longer cut the top frame of the BPM box. The 16-beat label, which sat over the box, is no longer drawn.
  • 4/8-Beat Loop Mode also accepts a track loaded over Pro DJ Link from another player.
  • New version 1.0.5 (it follows 0.1.10). Not tested on a deck: this update ran in the emulator only. The mods in it stay beta. Not tested at all: LOOP MODE and the Phase Meter master box with linked players, an SD card, and the saved WAVE COLOR on a Mac (HFS+) stick. LEFT PLAYHEAD still keeps its choice the old way.

4/8-Beat Loop Mode updated to v0.1.3

  • A track loaded over Pro DJ Link from another player is accepted like a local one (every other guard is unchanged). Not tested with linked players.

All mods updated to v0.1.10

  • One update now holds every mod: RGB and 3-Band Waveforms, Browse BPM + Key, Gated Hotcues, Beat Numbers, Left Playhead, Phase Meter Type 2, 4/8-Beat Loop Mode and FLAC Playback, with the Stock, Black or Light screen. The website offers it next to the stock restore.
  • New UTILITY > GUI ERRORS: OFF hides ordinary error popups (for example CANNOT PLAY TRACK); the player still detects the fault, and firmware-update errors always stay visible.
  • New UTILITY > BEAT NUMBERS and LOOP MODE, ON by default: OFF hides the beat numbers, or gives the LOOP MODE button its stock function back, at once.
  • GUI ERRORS, BEAT NUMBERS and LOOP MODE are saved on the USB stick or SD card and come back at the next start.
  • USB sticks formatted on a Mac (Mac OS Extended, HFS+), where rekordbox keeps its export in a hidden /.PIONEER folder: the RGB and 3BAND waveforms now load from them, also over Pro DJ Link, and the GUI ERRORS, BEAT NUMBERS and LOOP MODE choices are saved on them. The PHASE METER and LEFT PLAYHEAD choices are not saved on such a stick yet.
  • Changing a UTILITY switch at the moment the stick's saved choices are read can no longer reset the other two switches.
  • Phase Meter Type 2: the white centre line is gone, as on the CDJ-2000NXS2.
  • The detail waveform no longer draws white lines through the beats; the red downbeat and white beat markers stay.
  • Tested on a deck with the Stock, Black and Light screens: installed and working. The mods in it stay beta.

RGB and 3-Band Waveforms updated to v1.2.1

  • The waveforms load from HFS+ (Mac) sticks too; on such a stick they stayed BLUE.

Browse BPM + Key updated to v1.1.0

  • Key first: the Browse BPM/KEY column shows the key before the BPM, for example "10A 126.0" (was "126.0 10A"), so the stock key-match highlight works again: the key icon turns green for tracks that match the key of the master player.
  • The wrapper runs the 1.0.0 payload unchanged and rewrites its text in place; lookups, fallbacks and the boot credit are as in 1.0.0.
  • The standalone mod is hardware-tested; the new integrated build versions remain beta and have not been tested on a physical deck.

RGB and 3-Band Waveforms updated to v1.1.0

  • Beta: the detail waveform now uses the full 480 px screen width (stock BLUE, RGB and 3BAND) with the playhead centred, or at the Left Playhead position.
  • The right-hand ZOOM/GRID wheel and the left-hand MEMORY/CUE labels are removed in every build; the overview strip keeps its width.
  • Beat Numbers, Phase Meter and Left Playhead follow the new geometry. Emulator-tested only; earlier hardware evidence does not apply.

Beat Numbers updated to v0.2.0

  • Beta: the detail waveform now uses the full 480 px screen width (stock BLUE, RGB and 3BAND) with the playhead centred, or at the Left Playhead position.
  • The right-hand ZOOM/GRID wheel and the left-hand MEMORY/CUE labels are removed in every build; the overview strip keeps its width.
  • Beat Numbers, Phase Meter and Left Playhead follow the new geometry. Emulator-tested only; earlier hardware evidence does not apply.

Left Playhead updated to v0.4.0

  • Beta: the detail waveform now uses the full 480 px screen width (stock BLUE, RGB and 3BAND) with the playhead centred, or at the Left Playhead position.
  • The right-hand ZOOM/GRID wheel and the left-hand MEMORY/CUE labels are removed in every build; the overview strip keeps its width.
  • Beat Numbers, Phase Meter and Left Playhead follow the new geometry. Emulator-tested only; earlier hardware evidence does not apply.

Phase Meter Type 2 updated to v0.3.6

  • Beta: the detail waveform now uses the full 480 px screen width (stock BLUE, RGB and 3BAND) with the playhead centred, or at the Left Playhead position.
  • The right-hand ZOOM/GRID wheel and the left-hand MEMORY/CUE labels are removed in every build; the overview strip keeps its width.
  • Beat Numbers, Phase Meter and Left Playhead follow the new geometry. Emulator-tested only; earlier hardware evidence does not apply.
  • The earlier v0.3.5 was hardware-tested on a CDJ-2000NXS and promoted to stable without a firmware change. The later full-width v0.3.6 remains beta and has not been hardware-tested.
  • Smoother Type 2 and correct under SYNC: the local lane now uses the deck's effective playback rate (the sync-follow ratio while SYNC is on) instead of the displayed tempo, which is a BPM-like number under SYNC and made the lanes space out and scroll erratically; every transport frame is independent (elapsed on most frames, period and rate held), so dropped GUI frames no longer discard the master lane; the master lane free-runs between beat packets and survives one missed packet; the GUI repaints labels and counters only when they change and sets the fill colour once, cutting about 290 drawing calls per frame.
  • Type 2 now follows stock NXS2: the MASTER PLAYER box, number and master bar counter show only while another linked player is master; with no master or when this deck is the master they are hidden and the orange lane stays an empty baseline (the lane no longer copies the local grid for a self master).

Left Playhead updated to v0.3.0

  • Add a native LEFT PLAYHEAD Utility ON/OFF setting, with an ON fallback and a separate USB/SD persistence journal.
  • Restore the centered viewport and line when OFF; keep Beat Numbers aligned when switching.
  • Release every existing Left Playhead combination as an integrated build.

4/8-Beat Loop Mode updated to v0.1.2

  • LOOP MODE now opens the stock BEAT LOOP menu on press; its highlight follows the loop length (4, then 2 or 1 when halved, 8 on hold) and it closes when you exit the loop.
  • Same four-beat press, active-loop halving and one-shot eight-beat hold; every combination, including FLAC Playback, carries the change.
  • Preserve the current Left Playhead Utility ON/OFF setting and revised Beat Numbers layouts in all combinations.
  • Retain the verified native four-beat press, active-loop halving and one-shot eight-beat hold.

FLAC Playback updated to v0.1.0

  • First release: play FLAC files from rekordbox playlists on USB and from the USB folder browser.
  • Works together with every other CDJ-2000NXS mod and screen theme.
  • Experimental: tested in the emulator only, not yet on a physical deck.

RGB and 3-Band Waveforms updated to v1.0.0

  • RGB and 3-Band detail and overview waveforms on the CDJ-2000NXS, chosen on the deck with UTILITY → WAVE COLOR (BLUE / RGB / 3BAND).

Browse BPM + Key updated to v1.0.0

  • BPM and key together in the Browse BPM/KEY column, for example "126.0 10A", for local rekordbox libraries.

Gated Hotcues updated to v0.1.0

  • Freeze the independent guarded native patcher with its exact emulator evidence.

Beat Numbers updated to v0.1.2

  • Resize and reposition the Beat Numbers overlay when the Left Playhead Utility toggle changes. Standalone Beat Numbers retains its current firmware.
  • Place labels using actual future beat events and fractional phase instead of average extrapolation.
  • Suppress labels in long gridless intros/outros and beyond the last grid event.
  • Qualify changed-tempo centered/Left geometry and all waveform styles without guest RAM writes.

Left Playhead updated to v0.2.0

  • Add a native LEFT PLAYHEAD Utility ON/OFF setting, starting ON.
  • Restore the centered viewport and line when OFF; keep Beat Numbers aligned when switching.
  • Release every existing Left Playhead combination as an integrated build.
  • Admit the exact Hide Zoom Dial v2 stock image; both whole-UPD patch orders produce identical output.
  • Document the NXS2 quarter-width viewport/line reference and native hidden-wheel coexistence on BLUE/RGB/3Band.

Stock Theme updated to v0.2.0

  • Enable integrated combinations with all five functional NXS1 mods. Existing standalone firmware remains unchanged.
  • Original screen colours, without the right-hand ZOOM/GRID wheel.
  • First standalone website theme for the CDJ-2000NXS; hardware testing pending.

Black Theme updated to v0.2.0

  • Enable integrated combinations with all five functional NXS1 mods. Existing standalone firmware remains unchanged.
  • Dark neutral artwork and panels in pure black, without the right-hand ZOOM/GRID wheel.
  • First standalone website theme for the CDJ-2000NXS; hardware testing pending.

Light Theme updated to v0.2.0

  • Enable integrated combinations with all five functional NXS1 mods. Existing standalone firmware remains unchanged.
  • A light screen including the clock, track, tempo, BPM and NO DISC strip; no right-hand ZOOM/GRID wheel.
  • First standalone website theme for the CDJ-2000NXS; hardware testing pending.

Phase Meter Type 2 updated to v0.3.2

  • Enable TYPE 2 by default when no saved preference exists; preserve explicit Utility choices.
  • Publish the guarded Renesas ABI build with Utility selection and integrated mod/theme combinations.

4/8-Beat Loop Mode updated to v0.1.0

  • Press physical LOOP MODE to create a four-beat loop. Press again during an active loop to halve it. Hold to select eight beats once; release keeps the loop playing.

RGB and 3-Band Waveforms updated to v0.1.0

  • First website release for the CDJ-2000NXS (firmware 1.44): native RGB and 3-Band detail and overview waveforms with a WAVE COLOR Utility row (BLUE / RGB / 3BAND), stock BLUE fallback.
  • Includes the lab's repair for the stock PLAYER No. Utility setting (the first lab previews could mishandle changing the player number).
  • The boot screen shows "Mods by LNNRT" under the firmware version.
  • Emulator-tested only; not yet tested on a deck.

Browse BPM + Key updated to v0.1.0

  • First website release for the CDJ-2000NXS (firmware 1.44): BPM and key together in the Browse BPM/KEY column for local rekordbox libraries.
  • Emulator-tested only (24 Browse rows, missing-value fallback, stack headroom); not yet tested on a deck.
  • The boot screen shows "Mods by LNNRT" under the firmware version.

Beat Numbers updated to v0.1.0

  • Freeze independent v6 native payload, source, tests and guarded two-hook patcher.
  • Qualify centered BLUE and explicit Left BLUE/RGB/3-Band across all five zooms.
  • Keep earlier centered v5 source and runtime report immutable.

Left Playhead updated to v0.1.0

  • Implement guarded independent GUI geometry relocation and modern helper, with separate CLI and tests.
  • Qualify native BLUE/RGB/3-Band, BLUE boundary/search behavior, stack headroom and explicit Beat Numbers v6 composition.